Installing a reduced pressure zone backflow assembly is absolutely necessary for any irrigation sprinkler system in the Orlando or Central Florida area. This type of backflow assembly protects the potable water system from cross-contamination by preventing reverse flow from back-siphonage or back pressure.
When a reduced pressure zone backflow assembly is installed at either your home or business, it will most likely need to be installed on Schedule 80 PVC, galvanized, or copper pipe & fittings to comply with local code. The reduced pressure zone backflow assembly must always be installed with the relief valve outlet at a minimum of 12 inches above grade but must not exceed a maximum height of 3 feet.
Any backflow assembly must be tested annually to comply with local code. They must be tested by a state-certified backflow tester with a pressure differential type gauge. If the backflow fails the test, it must be repaired by a state-certified tester that is also certified to repair the unit. The results must then be logged with your local municipality by the test/repair contractor.
If you have a reduced pressure zone backflow assembly installation at either your home or business that requires an annual test, please call Hessenauer Sprinkler Repair & Irrigation on 407-302-2227 to make an appointment. We carry out backflow tests & repairs within the Orlando or Central Florida area. If a backflow assembly is not installed at your property, we can recommend & install the correct type to protect your potable water supply from contamination for your irrigation sprinkler system.
